Comfort

Call now to find out how: 434.429.3088

SRG U.S. Parts & Equipment

Please contact us to order any of the parts & equipment listed below.
SRG Class a fuel burn crib
Part # BC-A-4457
$850.00
burncrib 		  SRG burn cribs help reduce the amount of heat that is transferred to the floor. Conventional burns cribs allow the hot coals to fall through and lay on the floor. This causes a rapid increase in the floor temperature in one small area. This type of rapid heating stresses the floor and leads to premature cracking, spalling and many other detrimental structural affects.
 


• 44” x 57” Platform raised 12 inches from the floor surface
• Reduce the heat load on concrete floor and metal floors
•Protect your building by burning on an SRG Burn Crib
•The Cribs large size accommodates most size pallets
• Standard Fire Brick can be replaced
• Approximate weight: 300 lbs direct streams won’t push the crib
• Custom sizes and versions available
• Ships in 3 parts- Two people can easily move and assemble the crib
• We ship nationwide. Call for shipping estimates.

Data Sheet - Click here to view and or print.

Burn Crib 44" x 57" with Ceiling Cover -
$1,750.00
Part # BC-A-4457-1  

 
   

Contact us for more information.

______________________________________________________________________________________
Floor Kit
    Order our floor kit for additional protection, comes four precut sections of 3” x 3” angle Iron, floor anchors, and enough 2 ½” thick fire clay brick for a surface 18” larger than our burn crib.
   

Contact us for more information.

______________________________________________________________________________________
NFPA 1403 Signage
    
Part#    
NFPA 1403 Signage   This sign-age meets Virginia prototype requirements for Live Fire Training. Custom signs are available for other states as well. Please Contact us to order or to place a custom sign order.


Attention Octagon Sign - 36" x 36"Aluminum, Red & White, Reflective. Meets NFPA 1403 Standards.

$325
    
NFPA 1403 Signage  

Live Fire Training Usage Criteria Sign - 24" x 36" Aluminum, Red & White. Meets NFPA 1403 Standards.

In accordance with the VFSB, Prototype 1 - Class A & class B and Prototype 2 - Class A & class B are available. See list below.

Prototype 1 Class A Fuel - Part# SG-P1A
Prototype 1 Class B Fuel - Part# SG-P1B
Prototype 2 Class A Fuel - Part# SG-P2A
Prototype 2 Class B Fuel - Part$# SG-P2B

$205
    
______________________________________________________________________________________
90° Insertion Sensor
$72.00
  
Compression Fittings
$6.50
1/4” diameter 90°/type K grounded temperature sensor with standard high temperature plug. 90° Insertion Sensor   High temperature 1/4”,1/8", & 3/16" bore thru compression fitting with Stainless Steel gland. 1/4 NPT & 3/8 NPT mounting and can be used with the mounting flange.
Compression Fittings
______________________________________________________________________________________
NPT Mounting Flange
$4.50
  
Door/window hold back Holder
$5.50
Cast Iron 1/4 or 3/8 NPT mounting flange, 2.6”, 1.625” hole spacing and 1/4” diameter mounting screw. NPT Mounting Flange   Suitable for holding open doors or windows for CMU and all metal buildings.


Door Hook
______________________________________________________________________________________
Ceiling & wall sensors
$72.00
  
Ceiling & Wall Sensors with 24" Lead Wire Unterminated
$72.00
Ceiling and wall sensors terminated with a High Temperature standard plug. Insertion Sensor with Plug   Ceiling and wall sensors unterminated with a 24" lead wire. Plug not included. Insertion Sensors
______________________________________________________________________________________
High Temperature Jack
$14.00
  
High Temperature Plug
$14.00
Jack
Standard type K jack for terminating bare wire. High temperature - 800°F.		   Plug
Standard type K plug for terminating bare wire. High temperature - 800 °F.
______________________________________________________________________________________
Scuppers
  

 
Scupper   Scuppers
______________________________________________________________________________________
Door SweepsDoor Sweep
  
Type of Door Sweep Price Part #

42" High Temp Silicone

$185.50

DSHT-42

36" High Temp Silicone

$156.13

DSHT-36

42" High Temp Silicone Kit

$252.19

DSHT-42-Kit

36" High Temp Silicone Kit

$222.81

DSHT-36-Kit

42" Heavy Duty Rubber 

$149.60

DSHD-36

36" Heavy Duty Rubber

$149.60

DSHD-42

42" Heavy Duty Rubber Kit

$216.29

DSHD-36-Kit

36" Heavy Duty Rubber Kit

$216.29

DSHD-42-Kit

SS Mounting Strip Pre Drilled 36"

$112.50

DSMS-36

SS Mounting Strip Pre Drilled 42"

$118.50

DSMS-42
______________________________________________________________________________________
Internal Metal Door Supports
$28.00
Hinge Shimes
$18.00
Part# MDS-42 Part # HS-WHP-1/4
   
______________________________________________________________________________________
Wall Guard Heavy Duty Square
$55.00
Wall Guard Heavy Duty Bullet
$65.00
Part # BKT-100 Part # BKT-200
Guard Bracket Bullet
______________________________________________________________________________________
Wall Guard Round
$75.00
Wall Guard with MTG Plate
$245.00
Part # BKT-300
Guard Bracket Round		 Part # BKT-500
______________________________________________________________________________________
Screws for Mounting Padginite - Stainless Steel
$
Stainless Steel Washers for Screws
$
Part # SC-3SS Part # SC-WA-14
______________________________________________________________________________________

 

Links

 

latest news

 

Read More